Exit Screen; Entering The Uefi Boot Manager - Dell DX6004S Hardware Owner's Manual

Exit Screen

Press <Esc> to exit the System Setup program; the Exit screen displays:
•
Save Changes and Exit
•
Discard Changes and Exit
•
Return to Setup

Entering the UEFI Boot Manager

NOTE:
Operating systems must be 64-bit UEFI-compatible (for example, Microsoft
Windows Server
and 32-bit operating systems can only be installed from the BIOS boot mode.
NOTE:
The Boot Mode must be set to UEFI in the System Setup program to access
the UEFI Boot Manager.
The UEFI Boot Manager enables you to:
• Add, delete, and arrange boot options
• Access the System Setup program and BIOS-level boot options without
rebooting
To enter the UEFI Boot Manager:
1 Turn on or restart your system.
2 Press <F11> after you see the following message:
<F11> = UEFI Boot Manager
NOTE:
If your operating system begins to load before you press <F11>, allow the
system to finish booting, and then restart your system and try again.
®
2008 x64 version) to be installed from the UEFI boot mode. DOS
The system will not respond until the USB keyboard is active.
Using the System Setup Program and UEFI Boot Manager
®
63