Serial Communication Screen; System Security Screen - Dell 1955 Hardware Owner's Manual

Table 2-5. Integrated Devices Screen Options (continued)
Option
MAC Address
TOE Capability

Serial Communication Screen

Table 2-6 lists the options and descriptions for the information fields that appear on the Serial
Communication screen.
Table 2-6. Serial Communication Screen Options
Option
Serial Communication
(Off default)
Failsafe Baud Rate
(115200 default)
Remote Terminal Type
(VT 100/VT 220 default)
Redirection After Boot
(Enabled default)

System Security Screen

Table 2-7 lists the options and descriptions for the information fields that appear on the System Security
screen.
Table 2-7. System Security Screen Options
Option
System Password
Description
Displays the MAC address for NIC2. This field does not have user-
selectable settings.
Displays status of the TCP/IP off-load engine (TOE) feature of
NIC2. See "Activating the Integrated NIC TOE" on page 84.
NOTE:
To use the TOE feature in a NIC team, a dual-port TOE
hardware key is required.
Description
Options are On with Console Redirection via COM2, and Off.
Displays the failsafe baud rate used for console redirection when
the baud rate cannot be negotiated automatically with the remote
terminal. This rate should not be adjusted.
Select either VT 100/VT 220 or ANSI.
Enables or disables BIOS console redirection after your system
boots to the operating system.
Description
Displays the current status of your system's password security
feature and allows you to assign and verify a new password.
NOTE:
See "Using the System Password" on page 51 for instructions
on assigning a password and using or changing an existing server
module password.
Using the System Setup Program
49