Server Module Messages - Dell 1955 Hardware Owner's Manual

Table 1-12. Gb Pass-through Module Indicators
Indicator Type Activity
Indicator
Link Green/amber
indicator/activity blinking
indicator
Green/off
Off/amber blinking The Gb Ethernet connector is not linked to the server
Off/off
Status indicator Green
Green blinking

Server Module Messages

System messages appear on the screen to notify you of a possible problem with the system. Table 1-13
lists the system messages that can occur and the probable cause and corrective action for each message.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
NOTE:
If you receive a system message that is not listed in Table 1-13, check the documentation for the application
that is running when the message appears or the operating system's documentation for an explanation of the
message and recommended action.
34
About Your System
Indicator Code
The Gb Ethernet connector is linked to the server module
and there is network activity
The Gb Ethernet connector is linked to the server module
and there is no network activity.
module and there is network activity.
The Gb Ethernet connector is not linked to the server
module and there is no network activity.
Module is operating correctly.
Module is being powered down by the DRAC/MC controller
due to an I/O module mismatch. See "Guidelines for
Installing Connectivity Modules" on page 28.