DI-634M User's Manual
Advanced > Filters (MAC Filters)
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network)
computers by their MAC addresses from accessing the Network.You can either manually
add a MAC address or select the MAC address from the list of clients that are currently
connected to the Broadband Router.
MAC Filters:
MAC Address:
DHCP Client:
D-Link Systems, Inc.
Select the filter you wish to use; in this case, MAC filters was
Filters:
chosen.
Choose Disable MAC filters; allow MAC addresses listed
below; or deny MAC addresses listed below.
Name:
Enter the name here.
Enter the MAC Address.
Select a DHCP client from the pull-down list; click Clone to
copy that MAC Address.
Using the Configuration Menu
39