D-Link DI-634M Manual page 61

DI-634M User's Manual
2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the correct Access Point. To
check this connection: Right-click on the Local Area Connection icon in the taskbar
select View Available Wireless Networks.The Connect to Wireless Network screen
will appear. Please make sure you have selected the correct available network, as
shown in the illustrations below.
Check that the IP Address assigned to the wireless adapter is within the same

IP Address range as the access point and gateway. (Since the DI-634M has
an IP Address of 192.168.0.1, wireless adapters must have an IP Address in
the same range, e.g., 192.168.0.x. Each device must have a unique IP Address;
no two devices may have the same IP Address. The subnet mask must be the
same for all the computers on the network.) To check the IP Address assigned
to the wireless adapter, double-click on the Local Area Connection icon in the
taskbar select the Support tab and the IP Address will be displayed. (Please
refer to Checking the IP Address in the Networking Basics section of this
manual.)
If it is necessary to assign a Static IP Address to the wireless adapter, please

refer to the appropriate section in Networking Basics. If you are entering a DNS
Server address you must also enter the Default Gateway Address. (Remember
that if you have a DHCP-capable router, you will not need to assign a Static IP
Address. See Networking Basics: Assigning a Static IP Address.)
D-Link Systems, Inc.
default
Troubleshooting
61