Pppoe - D-Link DI-634M Manual

DI-634M User's Manual
Home > WAN (PPPoE)
User Name:
Verify Password:
Service Name:
IP Address:
Network Mask:
Maximum Idle
Connection Mode
D-Link Systems, Inc.

PPPoE:

Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Your PPPoE username provided by your ISP.
Re-enter the PPPoE password.
Enter the Service Name provided by your ISP (optional).
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
The network mask of the PPPoE interface.
The Maximum Idle Time value is only used for the On Demand
connection mode. It specifies how many minutes the WAN
Time:
connection can be idle before the connection is dropped. A
value of zero means the connection will not be dropped due
to idle time.
Maximum Transmission Unit-1492 is the default setting-you
MTU:
may need to change the MTU for optimal performance with
your specific ISP. If you are using AOL DSL+ service, you may
need to set the MTU to 1400.
Typically, connections such as PPPoE, PPTP, and L2TP are not
Select: always on. The router allows you to set the connection mode.
The settings are:
Always on: A connection to the Inter net is always
maintained.
Connect on demand: A connection to the Internet is made
as needed; and the connection is dropped after "Maximum
Idle Time" minutes of no activity.
Manual: You have to open up the Web-based management
interface and click the Connect button manually any time that
you wish to connect to the Internet.
Using the Configuration Menu
23