D-Link DI-634M Manual page 65

DI-634M User's Manual
7. I forgot my encryption key.
Reset the DI-634M to its factory default settings and restore the other devices

on your network to their default settings. You may do this by pressing the Reset
button on the back of the unit. You will lose the current configuration settings.
8. Resetting the DI-634M to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose
to Reset the DI-634M to the factory default settings. Remember that D-Link MIMO
products network together, out of the box, at the factory default settings.
To hard-reset the DI-634M to Factory Default Settings, please do the following:
Locate the Reset button on the back of the DI-634M.

Use a paper clip to press the Reset button.

 Hold for about 10 seconds and then release.
 After the DI-634M reboots (this may take a few minutes) it will be reset to the
factory Default settings.
D-Link Systems, Inc.
Troubleshooting
65