Wireless Mac Cloning - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Configuration
Transmission
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance. This option is unavailable
Rate:
in Bridge Mode.
Channel Width:
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Visibisibility
This setting determines whether the DAP-1522 will continue to periodically broadcast its presence on the network. This option
Status:
is unavailable in Bridge Mode.
Security Mode:
Refer to page 65 for more information regarding wireless security.
Enable:
Enable the Wi-Fi Protected Setup feature.

Wireless MAC Cloning

Enabling this option allows the user to manually assign the source MAC address to packets forwarded by the DAP-1522. If not
manually assigned, the packet's source MAC address field will be automatically selected as the DAP-1522's MAC address.
MAC Address:
Enter the desired MAC address connected to your DAP-1522 to enable the clone function.
Scan:
Click the Scan button to search for all available devices connected to your DAP-1522's Ethernet ports
D-Link DAP-15 User Manual
This option is unavailable
This option
5