System - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Configuration
Save to Local
Use this option to save the current access point
Hard Drive:
configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
button. You will then see a file dialog, where you can
select a location and file name for the settings.
Load from Local
Use this option to load previously saved access
Hard Drive:
point configuration settings. First, use the Browse
control to find a previously save file of configuration
settings. Then, click the Load button to transfer
those settings to the access point.
Restore to
This option will restore all configuration settings
Factory Default:
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Note: Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Reboot the
Click to reboot the access point.
Device:
Clear Language
Click to clear the language pack. This will put the
Pack: web UI back to English.
D-Link DAP-15 User Manual

System

0