D-Link Xtreme N Duo DAP-1522 User Manual page 25

Section  - Configuration
Enable Auto
The Auto Channel Scan setting can be selected to allow the DAP-1522 to choose the channel with the least amount of
Channel Scan:
interference.
Wireless
Indicates the channel setting for the DAP-1522. The Channel can be changed to fit the channel setting for an existing wireless
Channel:
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
Transmission
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance.
Rate:
Channel Width:
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Visibility
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DAP-1522. If Invisible is
Status:
selected, the SSID of the DAP-1522 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DAP-1522 in order to connect to it.
Security Mode:
Refer to page 65 for more information regarding the wireless security.
Enable:
Enable the Wi-Fi Protected Setup feature.
Lock Wireless
Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN. Devices
Security
can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings
Settings:
with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager user.
Current PIN:
Shows the current value of the access point's PIN.
Generate New
Create a random number that is a valid PIN. This becomes the access point's PIN. You can then copy this PIN to the user
PIN:
interface of the user.
Reset PIN to
Restore the default PIN of the access point.
Default:
Reset to
Resets Wi-Fi Protected Status to Not Configured. Vista WPS icon will only be displayed when the Wi-Fi Protected Status is
Unconfigured:
Not Configured.
D-Link DAP-15 User Manual 5