System Functions; About System Settings; Changing System Settings; The System Menu - Clavia Nord C1 User Manual

Nord C1 Combo Organ
OS V1.0X

System Functions

ABOUT SYSTEM SETTINGS

System settings are global; they are not stored within a
program, but applies to all programs all of the time.
The system settings are divided into 3 menus:
• System menu
• MIDI menu
• Sound menu
A list of each menu and it's functions is printed on the front
panel.

CHANGING SYSTEM SETTINGS

To change a a system function:
1
Select the appropriate menu
SHIFT SYSTEM MIDI
Press + /
2
Select function
The current functions number is shown in the DIS-
PLAY, as well as it's current setting. Navigate through
the available functions by using the
tons.
3
Change setting
SHIFT VALUE
Press + buttons to navigate though the
functions possible settings.
Changes are automatically saved.
4
Press any of the
SYSTEM / MIDI / SOUND
exit the menu

THE SYSTEM MENU

1 Memory protect
ON
Program store is disabled.
OF
Program store is enabled.
2 Output Routing
Split Output: tonewheel organ is directed to HIGH LEVEL
SP
OUT and LEFT OUT.
Electric-V and Electric-F organs are directed to RIGHT
OUT.
ST
Stereo Output.
3 Transpose
-6 - +6 Sets transpose of both manuals and BASS PEDAL input in
range of -6 semi notes to + 6 semi notes, steps of 1 semi
note.
SOUND
/ buttons.
PROG/MENU
but-
buttons to
default value: OF
default value: ST
default value: 0
4 Fine Tune
27 - 53
Sets the tuning from 427 Hz to 453Hz, in steps of 1 Hz.
Default value is 40 (440Hz).
5 Sustain Pedal Polarity
CL
Pedal Closed: for use with a sustain pedal with closed polar-
ity.
OP
Pedal Open: for use with a sustain pedal with open polarity.
6 Sustain Pedal
Controls weather the selected organ model should respond to sustain
pedal messages. When a pedal is connected to the SUSTAIN PEDAL
input, sustain pedal messages are always send via MIDI OUT regard-
less of this setting.
ON
Sustain pedal messages enabled.
OFF
Sustain pedal messages disabled.
7 Rotary Control Type
Specifies the type of controller connected to the Rotary Control input.
If the Half Moon Switch option is selected the speed control buttons
on the front panel are disabled.
HA
Half Moon Switch: for use with the Half Moon Switch acces-
sory.
OP
Pedal Open: For use with a sustain pedal with open polarity.
CL
Pedal Closed: For use with a sustain pedal with closed
polarity.
8 Rotary Pedal Mode
Toggle: rotary speed is changed between SLOW and FAST
TO
each time the pedal is pressed down. By holding the pedal
pressed downed for the duration of 1 second the speed will
change to STOP.
HD
Hold: rotary speed follows the state of the pedal.
9 Swell Pedal Type
Here you can match the swell pedal characteristic for various manu-
facturers.
FA
Fatar.
ER
Ernie Ball.
YA
Yamaha.
RO
Roland.
10 Factory Reset
Press STORE to recall all system settings. Stored PROGRAM MODE
data is not affected. LIVE 1 and LIVE 2 data will be overwritten.

THE MIDI MENU

1 Upper Channel
Sets how messages are sent and received from the UPPER manual via
MIDI IN and MIDI OUT.
OFF
Messages are not sent.
System Functions
default value: 40
default value: CL
default value: ON
default value: CL
default value: HD
default value: RO
default value: 1
15