Trademarks: The Nord logo is registred trademark of Clavia DMI AB. All other trade- marks mentioned in this publication are the properties of their respective holders.
THE PROGRAM SECTION ......8 Connecting a bass pedal unit ........18 What is a Program? ............. 8 Setting up the Half Moon Switch ........ 18 Loading a Program ............. 8 Adjusting the pedal polarity ......... 18 Storing a Program ............... 8 Adjusting the swell pedal span........
THANK YOU! a single lightweight package. We would first like to thank you for purchasing the Nord C1 The dual keyboards, bass pedal input and high level out- Combo Organ! We hope you will find it to be everything puts allows you to use the instrument in the exact same ap- you wished for and that you’ll have many hours of great...
Organ section of a real organ. The fast trigger response is not velocity sen- sitive, which might not be preferable when using external sound sources. Please refer to “Playing an external sound source”...
THE REAR PANEL AUDIO CONNECTIONS BASS PEDAL To play the Nord C1 Combo Organ’s dedicated bass regis- The Nord C1 Combo Organ has three types of audio con- ters, connect MIDI OUT of your external controller (prefer- nectors: BASS PEDAL ably a bass pedal board) to the connector.
Page 7
Nord C1 Combo Organ Connections OS V1.0X Please refer to “Sustain Pedal Polarity” on page 15 or “Ad- For use with external sound devices you can disable the justing the pedal polarity” on page 18 for detailed instruc- Nord C1 Combo Organ from responding to sustain mes- tions.
DISPLAY to indicate you are in store mode. exactly as you left them the next time you return to that DISPLAY If the shows “PRO”, you must turn off memory live program.
DRAWBAR “pull out” and “push in” the drawbars using the •When the Tonewheel model is acti- buttons. The buttons are special in the way that they auto- BASS vated, the drawbars control the increment/decrement the drawbar value when held.
In other words, if you play a note or a chord and • An extremely accurate digital model of the original then add on more notes without releasing the previously chorus and vibrato scanner.
OS V1.0X VIBRATO/CHORUS LOW- Please note that the button for the val of the 5 drawbars when the key of C3 is played. The in- UPPER LOWER manual also controls the effect for the bass registers. tervals vary for the manual.
The Drawbar buttons are used to turn voices on and off. Light mode, slow. The drawbar LEDs 5-8 are lit up for an activated voice, and drawbar LEDs 1-4 are lit up for a deactivated voice. Light mode, fast.
Please note that this is dependant gain applied to the Overdrive, Amp or on the external cabinet circuitry, and if the LED do not flash Rotary Speaker effects respectively, de- but lit constantly you will experience a double rotary...
0 Transpose MIDI IN and MIDI OUT. -6 - +6 Sets transpose of both manuals and BASS PEDAL input in Messages are not sent. range of -6 semi notes to + 6 semi notes, steps of 1 semi note.
Vintage 1: medium level of artefacts. 7 Send Continuous Controller messages Clean: low level of artefacts. Press STORE to send the current state of the selected organ model’s default value: NO buttons and knobs as Continuous Controller messages via MIDI.
Please refer to “The MIDI Menu” on page 15 for detailed instructions. Press SYSTEM / MIDI / SOUND buttons to exit • MIDI channel setting 1 - 16 uses the fast trigger key- menu board response which result in MIDI note messages being sent with fixed velocity data.
(Dump One) or the complete program bank (Dump All) including Live 1 and Live 2 on an external device such When recording MIDI data to be played back on as a computer, or for transferring program data between other equipment: two units.