Next Steps - Alcatel OS6400-48 Hardware User's Manual

Mounting OS6400 Switches
5
Once the holes are aligned, insert a rack mount screw (not provided) through the bottom hole of each
flange. Tighten both screws until they are secure.
Note. Be sure to install the screws in the bottom hole of each flange, as shown, before proceeding.
6
Once the screws at the bottom of each flange are secure, install the remaining rack mount screw. Be
sure that all screws are securely tightened.

Next Steps

Rack Mounting Power Supplies
Detailed information on rack mounting power supplies is provided on
Powering On the Switch
To power on the chassis refer to
Stacking Multiple Switches Into a Virtual On the Switch
To stack multiple switches into a virtual chassis, refer to
page 3-10.
OmniSwitch 6400 Series Hardware Users Guide
Attaching the Switch to the Rack
"Connecting Chassis to Power Source" on page
"Setting Up a Stacked Configuration" on
July 2010
Rack-Mount Installation
page 3-8.
3-19.
page 3-9