Motorola STAC130 Manual page 82

stac130.bk : notes.fm5 Page 78 Tuesday, May 12, 1998 4:27 PM
Your SIM card won't work
The battery won't charge
The battery drains faster
than normal
You can't cancel Call
Diverting or Call Barring
o
The symbol is flashing
I can't make international
calls
English
78 What to do if...
Is the card inserted the right way round? See 'SIM card Insertion'.
Is the gold Card visibly damaged or scratched? Return the card to your Service Provider.
Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.
Check the charger. Is it properly connected? Are its contacts clean and dry? See 'Your Battery'.
Check the battery contacts. Are they clean and dry?
Check the battery temperature. If it is warm, let it cool before recharging.
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Are you in an area of variable coverage? This uses extra battery power.
Is your antenna fully extended? This helps use less battery power.
Is it a new battery? See 'Charging a New Battery'
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Is it a battery that hasn't been completely discharged? Allow the battery to fully discharge
(until the phone turns itself off) and then charge the battery overnight.
Check that the Frequency Of Search feature in the Network Selection menu has not been set to Fast or
Continuous. See 'Network Search'.
Check that the Battery Saving Mode feature has not been set to Off.
Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery
performance is significantly reduced.
Wait until you are in an area with good network coverage and try again.
There is not enough memory available to store another SMS message. Use the Messages menu to delete one
or more existing messages.
Some Service Providers automatically bar the ability to make international calls. Contact your Service Provider.
Have you included the relevant codes? Press and hold 0 to display the international dialling prefix (+) and
then enter the appropriate country code followed by the phone number.