Receiving A Phone Call; Ending A Phone Call - Motorola STAC130 Manual

stac130.bk : usephone.fm5 Page 25 Tuesday, May 12, 1998 4:27 PM

Receiving a Phone Call

To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM service.
• Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
When your phone receives a call, it will ring or vibrate. To answer
the call, extend the antenna and then open the phone. If your
network supports Caller Line Identification (CLI), the caller's
number or name will be displayed, depending on your Phone
Book entries.
Your phone automatically searches in the Phone Book for the
caller's number. If the number is found, then the name entry
associated with the number is displayed. If the number is not
found, or if it is but there is no associated name in the Phone
Book, then the caller's number is displayed.
Normally, the call is answered as soon as the phone is opened.
However, if the Key Answer Only option is selected, opening the
phone will not answer the call - you will have to press a key.
When the identification is displayed, you can decide whether or
not to answer the call by pressing O, a numeric key (1 to
9), * or >. To set this option, see 'Key Answer Only'.
You can also answer using the keys if the phone rings whilst the
phone is already open.
If your phone is open and you do not want to answer the call,
you can:
• Press and release C.
The caller is either diverted to a forwarding number or hears a
busy tone, depending on your features settings.
or
• Press and hold C. This will reject the incoming call. No call
divert option will be offered in this case.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed the next time you open the
phone, so that you know someone tried to call you.

Ending a Phone Call

To end a phone call, press O, C or close the phone.
Making and Receiving Phone Calls
25 English