Set Ringer Tone - Motorola STAC130 Manual

stac130.bk : opt_menu.fm5 Page 59 Tuesday, May 12, 1998 4:27 PM
• No Ring or Vibrate - the phone will just display the Call
message.
The setting you choose also defines the type of alert for an
A
incoming SMS message (except that if you select Vibrate Then
Ring, your phone will just vibrate).
O

Set Ringer Tone

This option sets the tone your phone will make when an
incoming call is received.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone - Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
If you select the Single Ring Tone option, the phone will only
A
ring once when a call is received.
O
Phone Lock
This option is used to set, and change, the unlock code.
The unlock code can be set to protect your phone from
unauthorised use. It can be set to automatically lock your phone
each time it is switched on.
The unlock code is a four digit number which is set at
manufacture to 1234. This can be changed at any time by using
the 'change unlock code' option.
Automatic Lock
This option can be used to automatically lock your phone each
time it is switched on.
The option has two settings, On or Off.
Lock Now
This option can be used to immediately lock your phone. Once
selected, your phone will be unusable until the unlock code is
entered.
Change Unlock Code
This option is used to change the unlock code.
After selecting this option, you will be asked to enter the current
security code before you can proceed.
You can now enter a four digit code to replace the old code.
By pressing M, you can access this option even when the
A
phone is locked.
Using the Options Menu
59 English