Call Voicemail - Motorola STAC130 Manual

stac130.bk : opt_menu.fm5 Page 54 Tuesday, May 12, 1998 4:27 PM
9 If no key is pressed the display will time-out after 1 minute
and return to the screen which was displayed prior to receipt
of the message.
Cell Broadcast Messages
These are general messages, broadcast to a group of phones and
can only be received when your phone is in standby mode.
These messages are broadcast in numbered 'channels' and, in
general, each channel will tend to carry one particular type of
information.
Typical cell broadcast channels could have information on local
weather conditions, traffic reports or stock market prices. Please
contact your network operator for a list of available channels and
the information they supply.
When the message has scrolled across the display, the beginning
of the message will be shown until you either remove it or a new
message arrives.
How to Read SMS Messages
You can use the scroll keys (M, < and >) to scroll
through messages in either the Received Messages or Outgoing
Messages lists.
To display a specific message, enter the message number, for
example press 5 to display the 5th message. If the message
does not exist, Invalid Msg Number will be displayed.
Alternatively, to display the next message, press O and select
Go To Next Message .
English
54 Using the Options Menu
How to Create and Edit SMS Messages
Use the Message Editor to create or modify text messages. When
you enter the editor, the last message that was edited will be
displayed. Press and hold C to clear the message and start a
new one, or modify the message displayed. For an explanation of
how to enter text, see 'How to Enter Alphabetic Characters' in
the The Phone Book Menu section.
Press O once you have completed your message. You will
then be presented with the following options:
Send Message - If you select this option you will be
prompted for a phone number, enter the number and then
press O to send the message.
Store Message - Select this option to store your edited
message in your Outgoing Messages list.
If you don't store the message after it has been edited, you
A
will lose all your changes as soon as you select another
message to be edited.
O

Call Voicemail

Once selected, this option will leave the Messages menu and
automatically make a phone call to the current voicemail number.
The display will show Calling and standard call operations can
be performed.
The voicemail phone number can be entered by selecting the
'Voicemail Number' option in the 'Message Settings' sub-menu.