Command Tables - Casio EA-200 Technical Reference

Command Tables

Command 1 - Channel Setup
*: parameter value marked with asterisk are initial defaults.
Channel
0 Clear all channels
*1 Channel 1
2 Channel 2
3 Channel 3
4 SONIC Channel
5 DIG IN Port
6 DIG OUT Port
10 Microphone
11 Analog Out CH3 1pin ±3Vout
12 Speaker
• Channel = 1, 2, 3 or 4, Operation = 5, 6, 11
{ 1, Channel, Operation, Pin No, Trigger Threshold, Trigger Edge }
Pin No
*2 1pin Vin (±10V)
10 6pin Vin-low (0–5V)
{ 1, Channel, Operation, Post-Processing, FFT Samples }
Operation
–––
0 Clear the selected channel.
*1 Auto-ID
2 Voltage (±10V)
(for Voltage probe)
4 Resistance
5 Period
6 Frequency
7 Temperature (Celsius)
8 Temperature (Fahrenheit)
9 Light
10 Voltage (0–5V)
11 Absolute Time
0 Clear the SONIC channel.
*1 Meters
2 Meters
3 Feet
5 Period
6 Frequency
11 Absolute Time
0 Clear the digital input channel.
*1 Active
Data String Output Loops
0 Clear the digital input channel.
1 to 32 Number of output data elements
(*1)
0 Clear the Microphone.
*1 Active
Data String Output Loops
0 Clear the analog out or speaker.
1 to 65535 Number of output data elements
(*1)
Trigger Threshold
Set input voltage threshold value
±10
–10 to +10.
0 to 5
Post-Processing
–––
*0 None
1 d/dt
2 d/dt, d 2 /dt 2
10 FFT-Real
11 FFT-Real, Imaginary
*0 None
1 d/dt
2 2
2 d/dt, d /dt
–––
Data string
0 to 255 Output data element value
*0 None
10 FFT-Real
11 FFT-Real, Imaginary
Data Output Selection
*0 Data string
1 Channel 1
2 Channel 2
3 Channel 3
10 Microphone
Trigger Edge (Operation = 5, 6)
*0 Rising edge to rising edge
1 Falling edge to falling edge
2 Rising edge to falling edge
3 Falling edge to rising edge
Trigger Edge (Operation = 11)
*0 Rising edge
1 Falling edge
2 Rising and falling edge
– 5 –
FFT Samples
–––
–––
1 to 13 Samples used
n
(*6) 2 (2–8192)
–––
–––
–––
1 to 13 Samples used
n
(*6) 2 (2–8192)
Data string
Output data element value
±1.5
• Record Time for Operations 5, 6, and 11
must be 2, 1, and 1 respectively.
• Trigger Source for Channels 1, 2, 3, and 4
must be 2, 3, 4, and 12 respectively.
• Clock Source must be 10.