Selecting A Logo At Startup; Selecting Aspect Ratio Of Screen - Canon ReallS SX80 User Manual

Setting Display Status

Selecting a Logo at Startup

[User screen settings] - [Projector on]
HDMI
DIGITAL PC
ANALOG PC
User screen settings
Projector on
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Canon logo Displays the Canon logo cap-
tured at the factory.
Skip Projects an input signal immedi-
ately after turning on the projec-
tor.
User logo Displays a user logo captured on
the [Logo capture] screen.
Press the OK button to accept your setting
and then press the MENU button.
• [Canon logo] is the factory default.
• [User logo] is available only when a
user's logo has been registered.

Selecting Aspect Ratio of Screen

[Screen aspect]
COMPONENT
VIDEO/S-VIDEO
USB
Display settings
You can select proper option corresponding
to the aspect ratio of the projecting screen.
Press the OK button to accept your setting
and then press the MENU button.
• [4:3] is the factory default.
• If you select [16:9 D. image shift], the
• [Auto] may be automatically selected for
84
HDMI
DIGITAL PC
ANALOG PC
Screen aspect
4:3 Select this when you use a screen with
aspect ratio of 4:3.
You can adjust the keystone distortion
with D.SHIFT/KEYSTONE button.
16:9 Select this when you use a screen
with aspect ratio of 16:9.
You can adjust the keystone distortion
with D.SHIFT/KEYSTONE button.
16:9 Select this when you use a screen
with aspect ratio of 16:9. We recom-
D. image
mend you to use this when you
shift
project visual software.
You can move the screen upward or
downward with D.SHIFT/KEYSTONE
button.
keystone adjustment will be reset. For
more details, refer to the page 56.
[Screen aspect] depending on the
screen aspect setting.
COMPONENT
VIDEO/S-VIDEO
USB
Display settings