Selecting An Input Signal Type (Component); Adjusting Input Signal (Analog Pc) - Total Dots - Canon ReallS SX80 User Manual

Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
HDMI
DIGITAL PC
ANALOG PC
Input signal select
You can select a proper component signal
type, if a video image from AV equipment
is not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• Refer to the User's Manual of your AV
equipment connected to the projector to
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) –
Total Dots
[Input signal settings] - [Total dots]
COMPONENT
VIDEO/S-VIDEO
USB
Display settings
You can adjust the total number of dots in
the horizontal direction. Adjust the number
of dots when noise is displayed on the
screen at both sides.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
• You can make adjustment either for
75
Setting Display Status
HDMI
DIGITAL PC
ANALOG PC
Input signal settings
Total dots
PC] function (P50) cannot adjust the
project image correctly.
[ANALOG PC-1] or [ANALOG PC-2].
COMPONENT
VIDEO/S-VIDEO
USB
Display settings