Canon Laser Shot LBP3300 User Manual page 332

I Setting the Network Transmission Speed/Transfer Mode and the DIP
Switches
Communication speed and
Transmission mode of LAN
Auto detect (default setting)
10BASE-T/Half-duplex
10BASE-T/Full-duplex
100BASE-TX/Half-duplex
100BASE-TX/Full-duplex
1
Open the expansion slot cover.
2
Turn the printer and computer OFF, remove the USB cable,
and then disconnect the power plug from the AC power outlet.
3
Remove all the interface cables and the power cord from the
printer.
4
Remove the two screws and remove the network board.
IMPORTANT
Do not touch the network board parts, printed wire, or connectors with your hands.
DIP switch setting
1 2 3 4
ON
OFF
OFF
1 2 3 4
ON
OFF
OFF
1 2 3 4
ON
OFF
OFF
1 2 3 4
ON
OFF
OFF
1 2 3 4
ON
OFF
OFF
Network Board 6-27
6