Adjusting The Luminance And Contrast - Canon EOS 10D Instruction Manual

Click White Balance Function
Makes white the standard for the point you selected and color in the image is adjusted.
Click the [Click] button.
1
When you move the cursor over the
image, the cursor [ ] changes to [
Click the point where is to be the standard.
2
The color in the image is adjusted with white as the standard on the point you
selected.
If you click on another point over the image, the white balance is adjusted again.
When you finish this operation, click the [Click] button.
The image is adjusted based on the value of 1
Even if you have selected a neutral gray point of the image, the result of adjustments is
the same as when you select a white point.
].
1 pixels from the clicked point.

Adjusting the Luminance and Contrast

You can adjust the luminance and contrast in the range of –100 to +100 (in 1-stop increments
when entering a value).
Adjust an image while viewing it.
Drag the slider left or right to adjust the luminance and contrast.
Adjusting the Color Tone, Color Saturation and Sharpness
You can adjust the color tone in the range of - 30 to +30 (in 1-step increments when entering a
value), the color saturation in the range of 0 to 200 (in 1-step increments when entering a
value) and the sharpness in the range of 0 to 500 (in 1-step increments when entering a value).
Adjust an image while viewing it.
Drag the slider left or right to adjust the color tone, color saturation sharpness.
Cover/Table of
Contents
Introduction
Enter a value to adjust the
1
Displaying Thumbnail Images
luminance and contrast.
and Performing Basic Edits
in the Main Window
Performing Detailed 2
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Restores the image to its
Image Window
original settings.
Enter a value to adjust the
color tone, color
saturation and sharpness. Checking an 4
Image in the Quick
Check Window
Troubleshooting
Shortcut Key List
Index
2-10