Correcting An Image Using The Copy Stamp Function - Canon EOS 10D Instruction Manual

Correcting an Image Using the Copy Stamp Function

You can correct an image by pasting a section copied from another part to an unwanted part of
the image.
Select the [Tools] menu [Start Stamp tool].
1
The copy stamp window appears.
Click the [100% view] button.
2
The image is displayed in the 100% view.
Display the section you want to correct.
3
Drag the image to display the section you want to correct.
Specify the section to copy.
4
Click the [Select Copy Source] button and then click the section to copy.
To change the copied section, repeat the above procedure.
The content of corrections cannot be applied to another image as a recipe. Apply the
corrections to another image individually using the [Copy] and [Paste] buttons.
The content of corrections is only displayed in the copy stamp window.
The image is displayed at 100%
(actual pixel size). Click this button
again to display the image in the
size that fits to the window.
Specifies the section to copy.
Only functions with [100% view].
Fix the position of copy source.
Drag the slider left or right, or click
the [ ] / [ ] buttons to set the size
(radius) of the image to be pasted.
You can also set the size by
entering your desired numbers.
Undoes the previous action.
Reverts to the original condition
before any corrections were
performed.
Copies the content of the
corrections specified.
Displays the previous image.*
Cancels all settings and closes
the window.
* Functions when you have selected multiple images and the copy stamp windows are displayed.
Correct the image.
5
Click or drag on the section you want to correct on the image. [+] in the window
indicates the copy origin, and [ ] indicates the copy destination.
The copied image is pasted in the position where you dragged.
Click the [OK] button.
6
In step 2, you can double-click on the section you want to correct to display the 100%
view. You can also double-click again to return to the original view.
In step 4, you can also specify the section to copy by holding down the <option> key
and clicking.
When you have corrected several places in an image, you can reconfirm the content of
your correction. Press <B> on the keyboard to display the previous correction and <F>
to display the next correction.
For information on shortcut keys, refer to the "Shortcut Key List" (p.5-3).
Cover/Table of
Contents
Displays the full screen. To return
to the original view, click this
button again.
To switch between full screen
display/normal screen display,
press the < > + <F11> keys on
Introduction
the keyboard.
You can select the pen type.
With [Brush] selected, the pasted
image's borders simulate a brush. Displaying Thumbnail Images
With [Pencil] selected, the pasted
and Performing Basic Edits
image's borders are sharp.
in the Main Window
Redoes all the corrections.
Redoes the previous correction.
Performing Detailed 2
Applies to the image the content of
Edits in the Edit
the corrections copied.
Window
Displays the next image.*
Applies the settings and closes the
Performing Detailed
window.
Edits in the Edit
Image Window
Checking an 4
Image in the Quick
Check Window
Troubleshooting
Shortcut Key List
Index
1-14
1
3