Canon EOS 10D Instruction Manual page 43

The editing data can be saved in a separate file (p.1-15).
You can transfer edited images to Photoshop (p.1-21).
Editing of RAW images with the RAW image adjustment function
recommended as there is almost no deterioration of the image which accompanies
editing. Although there is a similar function in the RGB image adjustment function
(p.2-7 to p.2-10), there is slight picture deterioration with editing. Therefore, where
editing only with the RAW image adjustment function is insufficient, efficient RAW
image editing which keeps image deterioration to a minimum can be performed by
additionally using the RGB image adjustment function.
Editing data performed with Digital Photo Professional has not directly edited the
image, but displays the image by applying virtual editing data (a recipe) (p.1-15).
Therefore, you can recover the image which was shot or the image which was last
saved (p.1-17) and editing can be performed any number of times.
To create an image which you have directly edited according to editing data, convert/
save the image as a different image from the edited image (p.1-18). Since the image
created by this procedure is edited directly, the image before editing cannot be
recovered.
Automatically Adjusting the Tone Curve (Tone Curve Assist)
(p.2-4 to p.2-7) is
You can automatically adjust the tone curve
standard image brightness and color.
Click the [
The image is adjusted.
Depending on the image, there may be cases where standard brightness and color are
not adjusted. If this happens, you should edit the image with the tone curve adjustment
function (p.2-9).
(p.2-9) of an image and adjust an image to a
] button.
Restores the image to
its original settings.
Cover/Table of
Contents
Introduction
1
Displaying Thumbnail Images
and Performing Basic Edits
in the Main Window
Performing Detailed 2
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Checking an 4
Image in the Quick
Check Window
Troubleshooting
Shortcut Key List
Index
2-8