Canon EOS 10D Instruction Manual page 34

Allows you to select the histogram displayed in the [RGB image adjustment] tab sheet on the
tool palette.
Select [Tone curve mode] (tone curve display) and [Interpolation method] (tie method) for the
tone curve (p.2-9) displayed in the [RGB image adjustment] tab sheet on the tool palette.
Allows you to select whether the tool palette is displayed as [Docking display]
(within the window) or [Floating display] (another window).
Select a color space for the monitor. If you select the [Monitor profile], click the [Browse] button and
select a profile for the used monitor.
Check to preserve [Color tone],
[Color saturation] and
[Sharpness] settings for each
Picture Style parameter (p.2-7).
Select a CMYK simulation profile to be used in CMYK simulation.
The image is displayed in the colors of the selected profile and you can simulate the color used
when you print in a CMYK environment such as that of a printer.
With this setting, [CMYK] is displayed at the bottom of each window
The CMYK simulation display can be temporarily canceled in the edit window
image window
Select a printer profile to be used for printing images (p.1-22).
When you restart Digital Photo Professional after changing [Default settings of RGB
Tone curve mode] in the [Tool palette] tab sheet or [Default settings of Work color
space] in the [Color management] tab sheet, the setting content is applied. However,
the setting content is not applied to an image which has been edited before a change
was made
Change an individual tone curve with the menu
tone curve while holding down the <control> key, an individual color space by
selecting the [Adjustment] menu
To select a monitor or printer profile, you need to have previously installed the monitor
and printer profiles to be used on the computer. For details on the monitor and printer
profiles to be used, refer to the user manual of each device.
Select a rendering intent (matching method) for printing
with Easy-PhotoPrint (p.1-23).
(p.3-2) by holding down the <space> key on the keyboard.
(p.1-11, p.2-7 to p.2-10) and which has a [RGB] mark displayed (p.1-3).
(p.2-9)
[Work color space] (p.1-10).
Cover/Table of
Introduction
Select from 5 types the color
space to be applied to an RGB
(JPEG, TIFF) image converted
and saved as a separate image
from a RAW image (p.1-18, p.1-
Displaying Thumbnail Images
19).
and Performing Basic Edits
in the Main Window
Select a rendering intent
(matching method) when a printing
profile has been set.
Performing Detailed
Select a rendering intent (matching
Edits in the Edit
method) when a CMYK simulation
Window
profile has been set.
Performing Detailed
Edits in the Edit
Image Window
Checking an
Image in the Quick
(p.1-2, p.2-2, p.3-2).
Check Window
(p.2-2) and the edit
Troubleshooting
Shortcut Key List
that appears by clicking on the
1-26
Contents
1
2
3
4
Index