Canon EOS 10D Instruction Manual page 39

Editing RAW Images with RAW Image Adjustment Functions
You can perform more detailed edits on RAW images, than in the main window. When edited
with the RAW image adjustment function (p.2-4 to
accompanies image editing. You can therefore edit an image multiple times while preserving
the image quality at the time the image was shot.
Display the RAW image in the edit window
1
When multiple images are displayed, click the image for which you wish to edit to
place it in the top window.
Select the [RAW image adjustment] tab on the tool palette.
2
The [RAW image adjustment] tab
sheet appears.
Edit the RAW images
3
(p.2-4 to p.2-7)
You can apply edits to other images by copying and pasting the editing data to the
other images (p.1-15).
You can revert edited images to the last saved settings or shot settings (p.1-17).
Compare the edited image with the original
4
Save the editing data to the image
5
You can convert an edited RAW image into an RGB (JPEG, TIFF) image and save it
(p.1-18).
p.2-7), there is almost no deterioration which
.
(p.2-2)
.
.
(p.2-3)
.
(p.1-17)
You cannot edit PowerShot Pro1 RAW images.
You cannot edit RGB (JPEG, TIFF) images with the RAW image adjustment function.
If you quit Digital Photo Professional before saving the editing data to images, editing
data applied to images will not be saved. Be sure to quit after saving editing data to
images (p.1-17).
The editing data can be saved in a separate file (p.1-15).
You can transfer edited images to Photoshop (p.1-21).
Editing of RAW images with the RAW image adjustment function
recommended as there is almost no deterioration of the image which accompanies
editing. Although there is a similar function in the RGB image adjustment function
(p.2-7 to p.2-10), there is slight picture deterioration with editing. Therefore, where
editing only with the RAW image adjustment function is insufficient, efficient RAW
image editing which keeps image deterioration to a minimum can be performed by
additionally using the RGB image adjustment function.
Editing data performed with Digital Photo Professional has not directly edited the
image, but displays the image by applying virtual editing data (a recipe) (p.1-15).
Therefore, you can recover the image which was shot or the image which was last
saved (p.1-17) and editing can be performed any number of times.
To create an image which you have directly edited according to editing data, convert/
save the image as a different image from the edited image (p.1-18). Since the image
created by this procedure is edited directly, the image before editing cannot be
recovered.
Adjusting the Brightness
You can adjust the brightness in the range of –2.0 to +2.0 (in 0.01-stop increments when
entering a value).
Adjust an image while viewing it.
Drag the slider left or right to adjust the brightness.
(p.2-4 to p.2-7) is
Restores the image to its original settings.
Enter a value to adjust the brightness.
Cover/Table of
Contents
Introduction
1
Displaying Thumbnail Images
and Performing Basic Edits
in the Main Window
Performing Detailed 2
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Checking an 4
Image in the Quick
Check Window
Troubleshooting
Shortcut Key List
Index
2-4