Brother PE-150V User Manual page 74

a
c
5. Use the arrow keys to move the needle to the
embroidery start position, and then start
embroidering.
6. Move the frame to the place indicated by "c"
and clamp it again with the carriage.
7. Embroider the next pattern. If using the same
pattern, go straight ahead and start
embroidering. If using a different pattern,
select the new pattern.
After touching "LAYOUT", touch "90°
clockwise" to change the arrow in the display
so that it points to the right. Then touch
"START/CENTER" to set the current needle
position as the embroidery start position.
8. Use the arrow keys to move the needle to the
previous embroidery end position, and then
continue embroidering.
1 Previous embroidery end
71