Brother PE-150V User Manual page 30

3. Place the fabric in the embroidery frame and
then attach the frame to the machine.
(See page 20 – 22)
1 Carriage (embroidery arm)
2 Embroidery frame
NOTE
Do not push down the carriage too hard as you
attach the hoop. Use caution so as not to move
the carriage sideways.
* It is easier to move the embroidery frame
under the presser foot if the presser foot lever
is raised higher than its normal "up" position.
1 Normal presser foot lever "up" position
2 Presser foot lever pushed up
3 Presser foot lever down position
4. Turn on the power. The light will shine when
the power is turned on.
5. Select a pattern.
6. Lower the presser foot lever and press the
"START/STOP" button to start the machine.
1 "START/STOP" button
27