Brother PT-9500PC Quick Reference page 56

4 Double-click the P-touch Editor 3.2
Installer icon.
→The Installer starts.
Confirm the drive to install the software
5
to, and then click [Custom Install].
To change the drive, click [Drive].
→The dialog box to select the
programs to install appears.
Clear the check boxes for all of the
6
printer drivers except for PT-9500PC
Driver.
7 Click [Install].
→Installation begins.
→When installation is complete, the
message "Installation is done."
appears.
8 Click [Quit].
9 Click [Restart].
→Installation of the printer driver is
complete, and the Macintosh will
restart.
After the Macintosh restarts, connect the
0
PT-9500PC to the Macintosh with the
USB interface cable, and then turn on the
PT-9500PC.
For details, refer to "Connecting to a
personal computer" (→ P.18).
55