Brother PT-9500PC Quick Reference page 41

Click the button for Driver.
3
→The Driver Setup dialog box appears.
Select "USB cable", and then click [OK].
4
→The Confirmation dialog box
appears.
Follow the instructions on each dialog
5
box and start installation.
b
Refer to steps
basic setup" (→ P.31).
→The Driver Setup (Brother
PT-9500PC) dialog box appears.
40
g
- in "Installing using
Select "Yes, I want to restart my
6
computer now.", and then click [Finish].
→Installation of the printer driver is
complete, and the personal
computer will restart.
■ Connecting to a serial port
Note
●
When installing the PT-9500PC to the
serial port of a personal computer
running Windows
2000 Pro/XP, install the printer driver
according to following steps.
Start the personal computer, and then
1
insert the CD-ROM into the CD-ROM
drive.
→The Brother Setup dialog box
appears.
• It may take a short time until the
Brother Setup dialog box appears.
• If the Brother Setup dialog box does not
appear, double-click the My Computer
icon, and then double-click the P-touch
icon.
Click the button for Advanced setup.
2
→The dialog box to select the software
to install appears.
®
98/98 SE/Me/