Brother PT-9500PC Quick Reference page 33

Click [Next].
c
→The setup preparation begins.
→When the preparation for setup is
complete, you will be instructed to
connect the PT-9500PC to the
personal computer.
d Connect the PT-9500PC to the personal
computer with the USB interface cable,
and then turn on the PT-9500PC.
For details, refer to "Connecting to a
personal computer" (→ P.18).
When connecting to a personal computer
running Windows
2000 Pro, proceed to step
→If the personal computer detects that
the PT-9500PC is connected, The
Found New Hardware Wizard dialog
box appears.
32
®
98/98 SE/Me/
h
(→ P.33).
Select "Install the software automatically
e
(Recommended)," and then click [Next].
→The necessary programs will be
detected.
→The Hardware Installation dialog box
appears.
Click [Continue Anyway].
f
• This software has no compatibility
problems with Windows
be used.
→Driver installation begins.
®
XP and can