Very Important - Brother MFC-9440CN User Manual

Brother mfc-9440cn: users manual
Hide thumbs Also See for MFC-9440CN:
Table of Contents

Advertisement

Chapter 7
Before you choose the ring pattern to
register
You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
Ring
Rings
Pattern
1
long-long
2
short-long-short
3
short-short-long
4
very long
(normal pattern)
Note
If the ring pattern you received is not on
this chart, please call your telephone
company and ask for one that is
shown.
The machine will only answer calls to its
registered number.
The first two rings are silent on the
machine. This is because the fax must
<<listen>> to the ring pattern (to compare
it to the pattern that was 'registered').
(Other telephones on the same line will
ring.)
If you program the machine properly, it will
recognize the registered ring pattern of the
'fax number' within 2 ring patterns and
then answer with a fax tone. When the
'voice number' is called, the machine will
not answer.
46
Registering the distinctive ring pattern

Very important!

7
After you have set the Distinctive Ring feature
to On, the receive mode is set to Manual
automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring
number, Manual mode means you must
answer all the calls yourself. You can not
change the receive mode to another mode
while Distinctive Ring is set to On.
a
Press Menu, 2, 0, 2.
Miscellaneous
2.Distinctive
b
Press a or b to choose Set.
c
Press OK.
d
Press a or b to choose the prestored
ring pattern you want to use.
Press OK.
e
(You will hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
f
Press Stop/Exit. Distinctive Ring is now
set to On.
Turning off distinctive ring
a
Press Menu, 2, 0, 2.
Miscellaneous
2.Distinctive
b
Press a or b to choose Off.
Press OK.
c
Press Stop/Exit.
Note
If you turn off Distinctive Ring, the
machine will stay in Manual receive
mode. You will need to set the Receive
Mode again. (See Choosing the receive
mode on page 39.)
7
7

Advertisement

Table of Contents
loading

Table of Contents