Using Remote Codes - Brother MFC-9440CN User Manual

Using remote codes

Fax Receive Code
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by pressing the fax receive code
l51. Wait for the chirping sounds then
replace the handset. (See Easy
receive on page 41.)
Telephone Answer Code
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double-ring) after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T ring off by pressing #51
(make sure you press this between the rings).
Changing the remote codes
The preset fax receive code is l51. The
preset telephone answer code is #51. If you
are always disconnected when accessing
your external TAD, try changing the
three-digit remote codes, for example ###
and 999.
a
Make sure you are in Fax mode
b
Press Menu 2, 1, 4.
Setup Receive
4.Remote Codes
c
Press a or b to choose On (or Off).
Press OK.
d
If you chose On in c, enter the new Fax
Receive Code.
Press OK.
e
Enter the new Telephone Answer Code.
Press OK.
f
Press Stop/Exit.
Telephone services and external devices
7
7
7
7
.
7
51