Checking The Remaining Life Of Parts; Reset Functions - Brother MFC-9125CN User Manual

Checking the remaining life of
parts
You can see the machine's parts life on the
LCD.
a
(For MFC-9325CW) Press Menu, 8, 3.
(For MFC-9125CN) Press Menu, 6, 3.
Machine Info.
3.Parts Life
b
Press a or b to choose 1.Drum,
2.Belt Unit, 3.PF Kit or
4.Fuser.
Press OK.
c
Press Stop/Exit.
Note
The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part's life counter was reset during
the life of the used part.
Troubleshooting and routine maintenance

Reset functions

C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 Address & Fax
Address & Fax resets the following
settings:
 Address Book
(One Touch Dial/Speed Dial/Setup
Groups)
 Programmed fax jobs in the memory
(Polled TX, Delayed Fax)
 Station ID
(name and number)
 Coverpage Msg
(comments)
Remote Fax Option

(Remote Access Code, Fax Storage,
Fax Forwarding, Paging and PC-Fax)
 Report settings
(Transmission Verification Report/Tel
Index List/Fax Journal)
 Setting Lock password
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.
C
C
191