Loading The Bottom Rack - Bosch Integra SHV99A13UC Use And Care Manual

Preparing and Loading the Dishware

Loading the Bottom Rack

NOTE: Keep the vent on the tub's right side clear
by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom
rack's left side, center, or back.
Place large
items in the
bottom rack.
Load pots
and pans
upside-down.
Figure 13
shows a
typical mixed
load in the
bottom rack.
Figure 14
shows the
bottom rack
load pattern
for 10 place
settings.
(AHAM DW-1 10 Place Setting)
Figure 15
shows the
bottom rack
load pattern
for 12 place
settings.
(AHAM DW-1 12 Place Setting)
When the bottom rack is loaded, push it into the
dishwasher.
To Load Extra Tall Items:
1. Remove the empty top rack by pulling it out
of the dishwasher until it stops rolling.
2. Pull the front of the rack upward and
outward until the rollers are completely free
of the roller guides. Set the top rack aside.
3. Push the roller guides back into the
dishwasher.
4. Insert the Extra Tall Item Sprinkler into the
Figure 13
Figure 14
Figure 15
(continued)
top rack spray
outlet and turn the
sprinkler
clockwise to lock
it into position as
shown in Figure
16.
NOTE: Keep the vent on the tub's right side clear
by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom
rack's left side, center, or back.
5. Place your extra
tall item(s) in the
bottom rack as
shown in Figure
17.
CAUTION
DISHWASHER DAMAGE: Reinstalling the
top rack without removing the extra tall
item sprinkler can damage the dishwasher.
Do not reinstall the top rack with the
sprinkler installed.
To remove the sprinkler and return the
dishwasher to its normal condition:
1. Turn the sprinkler counterclockwise and
remove it from the top rack spray outlet.
2. Retrieve the top rack.
3. Tilt the top rack upwards and position the
top rack rollers onto the roller guides.
4. Continue pushing the top rack until the
rollers are on the guides.
5. Push the top rack into the dishwasher.
Figure 16
Figure 17
7