You cannot change bands during a call. If you attempt to do so, your phone displays Unable to
A
Find Network and returns you to your In-Call display.
Type
This option determines how the phone tries to register with a new network. You may choose
either:
•
Automatic
Or
•
Manual
In the Automatic search mode, the phone will try to register with the first network in the sorted
list. If it is successful, your phone will display the network name in the status bar at the bottom of
the display. If registration is unsuccessful with one network in the list, your phone will try the next
listed network.
If your phone fails to register with any of the listed networks it will start the process again after a
preset period.
In the Manual search mode, the phone will present you with the sorted list of networks. (See
Available Networks). Use the scroll bar to select one network from the list. Tap OK and your phone
will try to register with the selected network.
If the registration is successful, the name of the network will appear in the status bar at the bottom
of the screen. If registration is unsuccessful, your phone will present the list again after a preset
period.
1
Tap on the pull down selection box at the Type: prompt.
2
Make your selection and tap OK.
3
Tap Cancel to return to the Network Setup screen.
Speed
This option is used to determine how long your phone waits before attempting to re-register after
a previous registration attempt fails.
1
Tap the Speed pull-down selection box to select either:
•
Slow
•
Medium
•
Fast
•
Continuous.
2
Make your selection and tap OK.
3
Tap Cancel to return to the Network Setup screen.
! Fast and Continuous Search may use up a significant amount of battery power.
System Setup 187