Using The Hairdryer - Fagor SP-1235 Instructions For Use Manual

3. SAFETY
The hairdryer is equipped with a an overload
protection system which switches off the
appliance if overheating occurs (e.g. if the
air inlet or outlet are blocked). If the hairdryer
switches off during use, turn the switch to "0"
and wait for 5 minutes approx. Remove the
cause of the obstruction and switch it on again.

4. USING THE HAIRDRYER

• After washing your hair, towel-dry and
comb it.
• Do not use any aerosols or flammable
chemical products on your hair.
• Plug in the appliance and turn the switch to
the desired temperature and air flow.
Mod. SP-1830
Cold air button: The cold air button is
for reducing the air temperature during
functioning, to allow rapid cooling regardless
of the switch position.
I/0 switch and air flow selector
This is for starting up and stopping the
appliance and also for selecting the most
suitable air flow.
0 = Off
1 = Gentle air flow
2 = Strong air flow
Temperature selector
The temperature selector is for selecting the
power and therefore the working temperature.
1 = Low temperature
2 = Medium temperature
3 = High temperature
Mod. SP-1235
I/0 Switch
This switch is for starting up and stopping the
appliance and for selecting the air flow and
temperature.
O = Off
1 = Medium temperature, low air flow.
2 = High temperature, high air flow.
Selecting voltage: This model may be used
with a voltage supply of either 120V~ or
230V~. Before using the appliance, check the
voltage selected is the same as that of your
mains supply. Otherwise, the appliance could
be irreparably damaged.
5. CLEANING
• Unplug the appliance before cleaning it.
• NEVER SUBMERGE THE APPLIANCE
IN WATER OR ALLOW MOISTURE TO
ENTER IT.
• Clean the air inlet grille regularly with a
brush, to remove any dust and hair which
may have become trapped in the grille.
Rotate the air inlet grille anticlockwise
to remove it. All components must be
completely dry before they are fitted back
on to the hairdryer.
• Clean the outside of the appliance with a
slightly damp cloth and dry it with a dry
cloth.
• Remove the accessories before cleaning
them.
6. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
ELECTRONIC APPLIANCES
At the end of its working
life, the product must not
be disposed of as urban
waste. It must be taken to
a special local authority
differentiated waste
collection centre or to a
dealer providing this service. Disposing of
a household appliance separately avoids
possible negative consequences for the
environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to
obtain significant savings in energy and
resources.
To remind you that you must collaborate
with a selective collection scheme, the
symbol shown appears on the product
warning you not to dispose of it in
traditional refuse containers.
For further information, contact your local
authority or the shop where you bought the
8