Table of Contents
Advertisement
10 ULEAD DVD MOVIEFACTORY USER GUIDE
USB port
The Universal Serial Bus (USB) connector lets you attach a wide
array of devices to your computer quickly and easily. These devices
include digital cameras, webcams, and just about every computer
peripheral. Since Windows 98SE, 2000, Me, and XP fully support
USB, installing the driver for this device is quick and easy too.
Check that the following device is working properly:
• Universal serial bus controller
Configuring DVD MovieFactory
Camcorders, VCRs, and VCD/DVD players are common sources of
video footage. To ensure a smooth interaction between these video
sources and your computer, make sure that the settings of DVD
MovieFactory are configured properly depending on the capture
device you are using.
DV (IEEE-1394 interface card)
To check the setup of DVD MovieFactory for DV
interface:
1. Connect your camcorder to your IEEE-1394 interface card.
2. Insert your video tape into the camcorder and switch it on. Make
sure it is in playback mode (usually named VTR or VCR). Check
your camcorder's manual for specific instructions.
3. Go to the Add/Edit Media page and click Capture Video to
open the Capture Video dialog box.
4. Check if your device is displayed under Source.
Note: When your camcorder is in Record mode (usually named
CAMERA or MOVIE), you can still capture real-time video directly in
MovieFactory, even if there's no video tape inserted.
Advertisement
Table of Contents
