Playback; Playing The Connected Component - Onkyo TX-NR3010 Instruction Manual

Playback

The on-screen information appears only on a TV that
is connected to HDMI outputs. If your TV is
connected to other video outputs, use the AV
receiver's display when changing settings.
This section describes the procedure for using the
remote controller, unless otherwise specified.

Playing the Connected Component

■
Operating with the remote controller
INPUT SELECTOR
RECEIVER
VOL q/w
Listening mode buttons
1 Press RECEIVER followed by an INPUT
SELECTOR button.
2
Start playback on the source component.
See also:
• "Playing an iPod/iPhone via USB"
• "Playing a USB Device" (➔ page
• "Listening to vTuner Internet Radio"
• "Registering Other Internet Radio"
• "Playing Music Files on a Server (DLNA)"
(➔ page 34)
• "Remote Playback" (➔ page 35)
• "Playing Music Files on a Shared Folder"
(➔ page 36)
• "Listening to AM/FM Radio" (➔ page
• "Playing Audio and Video from Separate Sources"
(➔ page 41)
• "iPod/iPhone Playback via Onkyo Dock"
(➔ page 92)
• "Controlling Other Components"
3
To adjust the volume, use VOL q/w.
4
Select a listening mode and enjoy!
See also:
• "Using the Listening Modes" (➔ page
• "Sound Program Edit" (➔ page
En-29
■
Operating on the AV receiver
Input selector buttons
(➔ page 31)
32)
(➔ page 32)
(➔ page 33)
1
Use the input selector buttons to select the input
37)
source.
2 Start playback on the source component.
3
To adjust the volume, use the MASTER VOLUME
(➔ page 94)
control.
4
Select a listening mode and enjoy!
45)
■
Screen Saver
75)
If there is no video signal on the current input source and
no operation for a specific time (three minutes by
default), a screen saver automatically comes on.
Tip
• The time until the screen saver activates itself can be changed
in the "Screen Saver" setting
• The screen will return to its previous state if the AV receiver is
operated.
Turning On & Basic Operations
MASTER VOLUME
LISTENING MODE
(➔ page 83).