Onkyo HT-RC460 Instruction Manual page 71

Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with the
appropriate remote control code, you can use it to operate
your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the AUX
INPUT MHL jack. We advise you to program the remote
control code on the AUX button.
Use the following remote control codes:
33101:
MHL-enabled mobile device
Note
• With some mobile devices, reliable operation cannot be
guaranteed.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the p
(limited to some models). The component must be able to
receive remote control commands via p and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
32910/33101/33501/31612:
Blu-ray Disc/DVD player with p
*1 The p supported by the AV receiver is the CEC system
control function of the HDMI standard.
Press the appropriate REMOTE
MODE button first.
a
b
c
*1
d
e
f
g
En-71
■
TV operation
Available buttons
a 8, INPUT, TV VOL q/w,
MUTING
b GUIDE
h
c q/w/e/r
ENTER
d SETUP
e 1, 3, 2, 5, 4,
7, 6
*1
i
f A (Red) *1
j
B (Green) *1
C (Yellow) *1
*1
D (Blue)
k
■
Blu-ray Disc player / HD DVD player operation
l
Available buttons
b TOP MENU
m
c q/w/e/r
ENTER
n
d SETUP
e 1, 3, 2, 5, 4,
7, 6
f A (Red)
B (Green)
C (Yellow)
D (Blue)
g Number: 1 to 9, 0
Number: +10 *1
o
Controlling Other Components
g Number: 1 to 9, 0
Number: +10 *1
i DISPLAY
k CH +/–
l PREV CH
m RETURN
n AUDIO *1
o CLR
h 8SOURCE
i DISPLAY
j MUTING
k CH +/–
DISC +/–
l MENU
m RETURN
n AUDIO *1
o CLR