Using The Music Optimizer; Muting The Av Receiver; Using Headphones - Onkyo HT-RC460 Instruction Manual

Using the Music Optimizer

The Music Optimizer function enhances the sound quality
of compressed music files.
1
Press MUSIC OPTIMIZER on the front panel.
The M.Opt indicator lights on the AV receiver's
display.
The MUSIC OPTIMIZER indicator lights on the
front panel.
Tip
• Alternatively, you can use Q SETUP on the remote
controller.
• See "Music Optimizer" for more details

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.
1
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the AV receiver's display.
Tip
• To unmute, press MUTING again or adjust the volume.
• Muting is automatically cancelled when the AV receiver is
set to standby.

Using Headphones

1
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the PHONES
jack.
While the headphones plug is inserted in the PHONES
jack, = indicator lights.
Note
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted in the PHONES
jack, the speakers are turned off. (The Powered Zone 2
speakers are not turned off.)
(➔ page 45).
• When you connect a pair of headphones, the listening mode
is set to Stereo, unless it's already set to Stereo, Mono,
Direct.
• If you connect an iPod or iPhone to the USB port on the AV
receiver, no sound will be output from the headphones jack.
En-42
Turning On & Basic Operations