Playback - Teac PD-H300mkIII Owner's Manual

1
1 Press the STANDBY/ON button to turn the unit on.
< If the PD-H300mkIII is connected to the A-H300mkIII with a
remote control cord, you can switch ON/standby both the A-
H300mkIII and the PD-H300mkIII by pressing the
STANDBY/ON button of the A-H300mkIII.
2 Press the OPEN/CLOSE button (L).
3 Place a disc on the tray with the printed label face up.
< Never place more than one disc on the tray.
< The disc must be loaded centrally into the disc tray. If the disc
is not correctly loaded, it may not be possible to open the tray
again once it has closed, so you should ensure the disc is
always centrally loaded in the tray.
< Do not force the tray by hand during opening and closing
operations.
8
3 2 4
5

Playback

4 Press the OPEN/CLOSE button (L) to close the tray.
(Audio CD)
The total number of the tracks and total play time of the disc
is displayed.
CD
WMA MP3
(MP3/WMA disc)
The total number of files of the disc is displayed.
CD
WMA MP3
< It may take several minutes to display the number of files.
5 Press the PLAY button (y) to start playback.
(Audio CD)
current track number
CD
WMA MP3
(MP3/WMA disc)
current folder number
CD
WMA MP3
Disc playback starts from the first track/file.
< MP3/WMA files recorded out of folders are automatically put
in the '001' folder, and playback starts from the first file of
the 001 folder.
< If there are folders that has no MP3/WMA file, this unit skips
them.
< If you load the disc, and then press the PLAY button (or the
numeric buttons of the remote control unit) without having
first closed the disc tray, the disc tray closes and playback
starts.
CHAP/TRK MIN SEC
RANDOM PROG. RPT A p B
CHAP/TRK MIN SEC
RANDOM PROG. RPT A p B
elapsed time of the current track
CHAP/TRK MIN SEC
RANDOM PROG. RPT A p B
current file number
CHAP/TRK MIN SEC
RANDOM PROG. RPT A p B