Programmed Playback - Teac PD-H300mkIII Owner's Manual

1
2
Up to 32 tracks can be programmed in the desired order.
1
Press the PROGRAM button in the stop mode.
'PROG.' lights on the display.
2
Press the numeric button to select a track.
program number
CHAP/TRK
CD
WMA MP3
To select a track in the audio CD, enter 2 digit numbers.
To select a MP3 or WMA file, enter 3 digit numbers.
Optionally, you may press just the number "5", and then wait
a few seconds or press the PROGRAM button.
You can also use the SKIP button and the PROGRAM button
to program tracks. Select a track using the SKIP buttons
(. / ), and within 5 seconds press the PROGRAM
button.
Repeat this step to program more.
< If you made a mistake, press the CLEAR button. The last
programmed number will be deleted.
< Up to 32 tracks can be programmed.
12

Programmed Playback

CLEAR
ENTER
./
3
track/file number
MIN SEC
RANDOM PROG. RPT A p B
3 When programming has been finished, press the PLAY
button to start programmed playback.
When the playback of all the programmed tracks has finished,
or if one of the following buttons is pressed, the PROGRAM
indicator will go off and the program mode will be cancelled:
STOP, STANDBY/ON
But the programmed contents aren't lost. You can return to
the programmed playback by pressing the PROGRAM button
and the PLAY button.
< If the disc tray is opened or the power cord is unplugged, the
programmed contents will be erased.
To check the programmed order
In the stop mode, press the PROGRAM button repeatedly.
The track number and program number will be shown on the
display.
To add a track/file to the program
In the stop mode, press the PROGRAM button repeatedly
until the program number you want to insert a track/file
appears on the display. If you want to add a track/file to the
end of the program, press the PROGRAM button repeatedly
until 'P-End' briefly appears on the display.
Then select a track number using the numeric buttons. The
track/file is added to the program.