D-Link DVG-G1402S Owner's Manual page 45

This window will aid
the use in configuring
filters for IP
addresses. This will
deny specified LAN
IP addresses or
specific ports
associated with these
LAN IP address from
accessing the
Internet. Well known
ports have already
been previously set
in the IP Filters List
and can be modified
by clicking their
corresponding edit
icon, and simple
adding an IP address
to the configuration.
To access this screen, click the Advanced tab along the top of the configuration window
and then the Filters tab to the left hand side.
Protocol
IP Address
Subnet Mask
Start Port/End Port
The protocol associated with this IP filter. The user may choose
between TCP, UDP or Both.
An IP address or range of IP addresses that will be denied
access to the Internet.
The subnet mask that corresponds to the IP address above.
A port or range of ports that will be denied access to the
44