Home > Wireless - D-Link DVG-G1402S Owner's Manual

Wireless LAN Usage
Wireless LAN Mode
Channel
Rate Config
SSID
Hidden SSID
Home > Wireless
This drop-down menu allows you to enable or disable the
Wireless LAN feature on the DVG-G1402S.
You can select between three IEEE WLAN standards − 802.11b/g,
802.11g, and 802.11b − depending upon which type of Wireless LAN
devices you have.
What channels are available for use by the access point depends on
the local regulatory environment. Remember that all devices
communicating with the device must use the same channel (and use
the same SSID). Use the drop down menu to select the channel used
for your 802.11b wireless LAN.
You can select between Long, Short, and Long and Short.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default setting
is default. The SSID can be easily changed to connect to an existing
wireless network or to establish a new wireless network.
Enabling this feature will prevent the DVG-G1402S from
broadcasting it's SSID. Remote stations will have to have the
router's SSID manually entered to connect.
10