Aiwa NSX-V70 Operating Instructions Manual page 36

3
DOLBY NR
7!?
DUBBING THE TAPE MANUALLY
Preparation
Wind up the tape to the point where recording will start.
Note that recording will be completed on one side of the tape
only.
1
2
3
4
5
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
first facing the foreground.
Press the DOLBY NR button to turn off the Dolby
NR.
00
NR on the display goes out.
Press the TAPE/DECK 1/2 button to select deck
1.
Press the REC/REC MUTE button to start
recording,
Playing and recording start simultaneously.
To stop
dubbing
Press the button.
To
set the Dolby NR
when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
To erase a recording
Make sure the microphone is not connected to this unit.
1 Insert the tape to be erased into deck 2 and press the TAPE/
DECK 1/2 button to display TAPE 2.
2 Wind up the tape to the point where the erasure is to be
started.
3 Set the reverse mode by pressing the REV MODE button.
4 Press the REC/REC MUTE button to start the erasure.
36