Using The Configuration Wizard - D-Link DI-524UP Owner's Manual

Using the Configuration Wizard

Whenever you want to configure
your network or the DI-524UP, you
can access the Configuration Menu
by opening the web-browser and
typing in the IP Address of the
DI-524UP. The DI-524UP default IP
Address is shown to the right:
•
Open the web browser.
•
Type in the IP Address of the
Router (http://192.168.0.1).
•
Type "admin" in the User
Name field.
•
Leave the Password blank.
•
Click OK.
The Home > Wizard window will
appear. Please refer to the Quick
Installation Guide
formation regarding
Wizard.
These buttons appear on most of the
configuration windows
section. Please
appropriate button at the bottom of
each window after you have made a
configuration change.
NOTE: If you have changed the
default IP Address assigned to the
DI-524UP, make sure to enter the
correct IP Address.
for more in-
the Setup
in this
click on the
Clicking Apply will save configured
settings to the router.
Clicking Cancel will clear changes
made to the current page.
Clicking Help will provide the user with
helpful information about the current
window.
Clicking
statistics of the current window.
10
192.168.0.1
Refresh will refresh the