D-Link DI-524UP Owner's Manual page 46

D-link 802.11g wireless router owner manual

Hide thumbs Also See for DI-524UP:

Table of Contents

Advanced > QoS > Physical Port

To enable QoS per port, first click the Physical Port radio button which will reveal the

preceeding window for the user to configure. Simply click the Enable check box of the

corresponding port to enable QoS. You may also set the bandwidth for that port by

using that corresponding pull-down menu. The user may choose a bandwidth between

128 Kbps to 32 Mbps. FULL denotes that the port will have the maximum transfer speed

allowed at any given time, up to 100Mbps. Click Apply to confirm your settings.

Table of Contents

Show Quick Links

Table of Contents