D-Link DI-1162M User Manual page 53

Dial In IP Pool
The dial in IP pool allows you to define a range of IP addresses that will be reserved for and assigned to dial-
in users.
The items are described as follows:
IP Address – This is the first IP Address that will be assigned to a dial-in user.
Range – This is the number of IP Addresses that can be assigned. In the window shown above, dial-in users
will be assigned the IP Addresses 170.100.200.1 or 170.100.200.2 (only two are necessary since the router
used in the examples has only two WAN ports).
Dial Backup Configuration
The dial backup configuration function allows you to configure information about a backup interface. An
example of a backup interface on the Remote Network Profile menu would be making WAN 2 a backup
interface for WAN 1. Enter configuration information below to complete the dial backup configuration.
47
DI-1162/DI-1162M Remote Access Router