L2Tp Wan Mode; Lan; Lan Settings - D-Link GamerLounge DGL-4300 Owner's Manual

L2TP WAN Mode

A method of connection that requires you to enter your L2TP IP Address, L2TP Subnet Mask,
L2TP Gateway IP Address, L2TP Server IP Address, Username and Password (provided by
your Internet Service Provider) to gain access to the Internet.
L2TP IP Address: Enter the IP Address provided by your ISP.
L2TP Subnet Mask: Enter the Subnet mask provided by your ISP.
L2TP Gateway IP
Enter the Gateway address provided by your ISP.
Address:
Enter the IP address of the L2TP server you are connecting to. This
L2TP Server IP
information is provided by your ISP.
Address:
The username that you use to login to your Internet connection.
User Name:
Enter the password associated with your username.
Password:
Retype the password for verification.
Verify Password:
Defines how long the machine can be idle before the L2TP connection is
Maximum Idle Time:
disconnected.
The Disconnect button will immediately terminate any active connection.
L2TP Connection:
Note: These buttons become enabled after the router has been rebooted
with the L2TP mode selected.

LAN

Your internal network settings are configured based on the IP Address and Subnet Mask assigned
in this section. The IP address is also used to access this Web-based management interface. It is
recommended that you use the default settings if you do not have an existing network.

LAN Settings

IP Address: The IP address of the router on the local area network. The local network
settings are based on the address assigned here.
The subnet mask of your router on the local area network.
Default Subnet Mask:
Used with multiple routers to broadcast routing information.
RIP Announcement:
This option is used if you have multiple routers.
Gateway Metric:
23
Using the Configuration Interface
Basic > WAN > L2TP
Basic > LAN
D-Link Systems, Inc.